Atwell, 6164   WA

                                                         A gold jig

The gold jig is designed for a Western Australian mining company which is used in the gold separation process.
By agitation with water it separates gold from other lighter materials.

A range of sizes is available.

The one pictured has 10 screen filters
1048 x 205 mm. each.

 

Gold jig animation

Precision Riffle splitter with controlled sample discharge.
(3mm to 16 mm slots width, specified by the client.)

The splitter is separable. The slots width and quantity may be adjusted to suit laboratory requirements.

The splitter is made from Stainless Steel with an electro polishing finish. It is suitable for Food, Pharmaceutical and Geotechnical laboratories.

The splitter can feature two dust hoods to minimise dust pollution when operated and a swivelled carrying handle to move the unit comfortably around the premises if necessary.

The dust hoods are conveniently hinged and allow for easy inspection of the riffles to check for blockages. By lifting the dust hood the operator has clear access to quickly rectify this type of problem.

 

 

The riffle splitter is shown with one of the dust hoods in the open position.

Precision Splitter animation

Laboratory Riffle Splitters welded. (Slot Width from 6mm to 12 mm)

Main features of the splitters are:

• Deep loading bunker which eliminates accidental spillage of the sample over the side of the splitter.
  
  
• Does not require special trays to contain samples. In fact, most of the containers purchased off the shelf will do the job.
  
  
• One support frame will fit for a range of splitters.
  
  
• The size of the unit is convenient for handling. In other words it is not too small as to be uncomfortable to work with.
  
  
• The splitter is made of Stainless Steel SS-316, with electro polish finish. The support frame is made of aluminium plate, with powder coat finish.
  
  

  The support frame can be made out of Stainless Steel if required.

  The unit is perfect to use when it comes to split small batches of different material samples.

  Optional features:

  1. Dust hood can be incorporated into design upon request.
  2. Special purposes trays are available.

  
  

Large Riffle Splitters. (20mm to 60mm slot width)

Main features of the splitters are:

• Dust hood and fully covered receiving trays eliminate the excessive dust pollution when operated.
  
  
• Special provision is made in the design to handle tipping over heavy loads, hence increasing the accuracy of the split.
  
  
• Supplied with three trays.
  
  
• Removable dividing head. Once the head is worn out it can be replaced without the need to buy a whole Riffle Splitter anew.
  
  
• One support frame will fit for a range of splitters.
  
  
• The sizes of the slots for different dividing heads are conforming to
  ISO 3082:1998(E) Standard.
  
  
• The splitter is made of Stainless Steel SS-316, with electro polish finish. The support frame is made of Mild Steel, with powder coat finish.

  The support frame can be made out of Stainless Steel if required.
  

Large Riffle Splitter animation

Laboratory Press 50 Ton

The model 30-GA is a desktop dry pressing machine up to 50 metric tons for materials / chemistry research laboratories to prepare compound ceramic sample. The unit incorporates manual hydraulic pump, single-acting, spring-return cylinder, pressure gauge and transparent protection shield.

The cylinder can be mounted in down-right position if needed. Different tooling can be design for the press to accommodate laboratory’s special needs.

Press Door animation